Plasterers Melbourne Northern Suburbs
Does your ceiling badly need a quick little touch-up to cover up the little flaws here and there? Are there annoying holes and cracks on your ceiling that irritate you every time your sight catches them?
If that’s so, we can assure you your ceiling needs solid plastering in Melbourne. The best way to get your plaster ceiling is by hiring plaster repairs in Melbourne, but if you are looking for a cheaper option, you can also do it yourself!
Doing it yourself sounds really fun, especially if you have a partner to do it with, but you want to keep in mind that this will only be temporary. However, if you want premium, long-lasting results, you need to get professional help. You can book your plasterer with us online by quickly searching plasterer near me.
How to plaster a ceiling step by step:
Now that you are ready to take up all that work, here is a brief and informative step by step guide to get you going through the process.
Get all the right tools:
Having the right equipment and supplies contributes so much to the final result of all your tiring efforts. We have listed below all the things you need to grab beforehand:
Secondly, cover up the rest of the furniture and the entire exposed floor with old newspapers or plastic sheets. Take extra precautions while covering up the floor because it’s extremely difficult to remove hardened plaster from surfaces.
As far as your own protection is concerned, make sure you are wearing old clothes and have your face covered with a face mask.
Prep your ceiling the right way:
You need to make sure that your ceiling is tidy and ready for all that plaster coverage. If there is any dust or cobwebs, clean them up with a vacuum. Then, go ahead and use a sponge and soapy water to get rid of even the tiniest dust particles that may be hiding on your ceiling.
Also, if your ceiling has been exposed to oil, don’t forget to use a degreaser first or the plaster won’t set.
The first thing you need to do in this step is mixing your plaster. Take equal amounts of water and plaster and mix in an old bucket.
Add a small amount of water to the ceiling and then coat with plaster. Once your first coat is on, let it dry for around 48 hours, and then do a second coat.
Finally, sand and smooth out your ceiling and tadaa! You’re done.
When the job is too big for you, Plasterer Melbourne is here to help you get the job done. Suspended ceilings including tile grid, fire rated ceilings, perforated plaster board ceilings and bulkheads are all part of the Plasterer Melbourne service.
Contact for a free Quote